Hardwood Flooring. Tuesday , February 20th , 2018 - 02:41:40 AM
Engineered wood flooring's greatest weakness is its thin top layer. Remarkably, this 1/16" to 1/8" finish layer can be sanded. But only once or twice - three is pushing it. In any case, I strongly recommend you seek the advice of a reputable
Hardwood floors, un-finished, finished or engineered, require daily cleaning with a periodic annual maintenance program to retain the luster, deep rich tones and the overall beauty of any wood floor. Contrary to popular belief, these floors do require occasional waxing, depending on traffic flow across the floor, with specialized cleaners designed to seal and protect the floor from scratches and abuse. In the past, presumptions have indicated that all the maintenance that is required for a wood floor is light sweeping and mopping. Although, there is some truth to this theory, depending on the selection of flooring material, failure to provide adequate protection to any floor will result in deterioration and damage of the flooring surface at an accelerated rate with possible replacement in as little as five years.
Sometimes, people who have installed Bruce wood flooring in their homes hear popping sounds when they walk across the floors. This is not defect in the Bruce hardwood flooring and is perfectly natural, so there is no cause for alarm. All hardwood goes through a process called patina and it may be caused by an uneven subfloor under the Bruce hardwood floors. If you glue the hardwood planks in place, you do have to make sure that you use the trowels properly when applying the adhesive so that you have a perfectly uniform surface for the hardwood floors.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does aimashup.org claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.