Hardwood Flooring. Thursday , February 15th , 2018 - 22:43:05 PM
Engineered floors are very similar to "solid" floors and in most cases are not easily distinguishable from natural hardwood when installed correctly. Engineered wood floors are comprised of multiple layers of plywood substrate with a top layer of actual hardwood. With varying degrees of thickness of the plywood substrate from two to ten ply (plywood layers); engineered floors are less expensive than natural hardwood surfaces while providing beauty and elegance to any interior room of the home.
The next product in the Impressions hardwood flooring line is a top selling 1/2" thick engineered hardwood called the Salem Series. The Salem series features a Perma-Finish Commercial Grade Water Based finish and is stocked with only Prime Select Grade oak products. The Salem Series has Red Oak & Brazilian Cherry as species available to the name and can be installed below, above & on grade. The Salem Series is an engineered hardwood floor with a hardwood base panel & 2mm thick sawn face wear layer for Oaks & 1.4mm for the Brazilian cherry. The Perma-Finish, being that it is a water base, allows the true coloring of the grain to show through and shine and is added protection against scratching. This product features boards of 1'-4' and an average board length of 31" making it a longer plank than most engineered wood flooring on today's market. The edges on this product are a 4-sided micro bevel and prevent chipping at the edges while defining the edge of each board. This environmentally friendly hardwood leaves a smaller carbon footprint on the planet due to less waste & less use of domestic trees in the creation of this floor. This is a very thick engineered hardwood and may be sanded and recoated many times over the life of this floor and will last many years. This product is only available in 3" widths for both the Oaks & Brazilian cherry floor. This product can be easily installed either by Glue, Nail or Staple down. The Brazilian Cherry is Lacey Act Compliant being harvested from forests that are used solely for hardwood flooring purposes.
Even with Bruce hardwood flooring, you will see variations in the wood in each plank. This is what will give your hardwood floors the unique appearance that you want to achieve. This variation exists in all qualities of Bruce hardwood floors because no two boards are the same. You do have to be careful even with hardwood even though it is solid. If you place furniture with sharp edges on the flooring it will dent the hardwood. Bruce wood flooring also goes through a natural aging process so if you have an area covered with a rug, when you move it the floor underneath will be lighter in color. It is recommended that you do move rugs from time to time to prevent this discoloration from occurring.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does aimashup.org claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.